Product Description

LAB SlapBox+™ enclosures are an “all-in-one” solution when adding bass to any aftermarket or factory sound system. Each SlapBox+™ enclosure is manufactured with industrial grade medium density fiberboard (MDF) and wrapped in premium black upholstery. A complimenting class D amplifier is flushed into the side of each enclosure, with variable crossovers and remote bass control. Each enclosure, amp and subwoofer are matched for maximum output and efficiency.

Vented Enclosure

• LAB SlapBox™ 0.55 ft^3 ported MDF subwoofer box
• Designed and optimized for a single 8" JL Audio® W3v3 woofer
• 0.55 cu. ft. tuned @ 33Hz
• Constructed of 0.75" CNC-cut high-grade MDF
• High-grade automotive black carpet
• Made in California, U.S.A.

Class-D Amplifier

• Flush-mounted on side of enclosure
• Unbalanced low-level RCA inputs
• High level 10 volt inputs
• Selectable amp turn-on selection with Remote/DC Input/Signal Sense
• 210W RMS @ 4 ohms
• Adjustable level control at 0.2v – 6v
• Bass boost at 0dB – 12dB
• Phase control at 0 – 180 degrees
• Quick connect Power/Remote/Ground Plug
• Variable crossover adjustments at 40Hz – 200Hz
• Visual protection circuit with DC Offset/Short Circuit/Thermal Over Load
• Bass remote with 3.5mm bass remote cable

8" Subwoofer

• JL Audio 8-Inch W3v3 Series
• Single 4 Ohm
• Power Handling: 250W RMS
• Recommended Power Range: 75 - 250 watts
• Impedance: Single 4-Ohm
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
• Stamped steel basket
• Customization trim ring
• Floating-cone attach method
• Highly linear, DMA-Optimized motor system
• Insert molded suspension, coil and terminal sub-assembly
• Patented vented reinforcement collar (VRC)
• Elevated frame cooling design
• Nickel plated brass spring terminals
• Engineered lead-wire design and attachments
• Precision-built in USA at JL Audio's Miramar, Florida factory
• Mounting depth: 4.63 "
• Cutout dimensions: 7.09 "
• Free Air Resonance (Fs): 35.14 Hz
• Sensitivity: 83.24 dB
• Xmax: 10.0 mm
• Reference Efficiency (no): 0.1300%
• Frequency response: ~28 ~ 250 Hz

Dimensions: 20"W x 9"H x 12"D